Performance Automatic Street Smart Transmission Systems PASS68103

Description

Performance Automatic PASS68103 Transmission Overview

The Performance Automatic Street Smart Transmission Systems PASS68103 is a matched automatic transmission package built for compatible Ford performance applications. It belongs to the Performance Automatic Street Smart Transmission Systems product line and carries manufacturer part number PASS68103.

This kit is listed as a remanufactured automatic transmission and is sold as a complete kit. It is designed around the Ford 6R80 transmission manufacturer code, a 6-speed automatic platform used in compatible late-model Ford RWD applications.

The PASS68103 package is built for street rods, street machines, and high-performance builds that need a matched automatic transmission system rather than a single standalone transmission. It includes important supporting components such as a torque converter, transmission controller, wiring harness, and dipstick.

This transmission system is designed for compatible 2015–2021 Ford applications with a 5.0L/302 V8 from the Ford modular V8 engine family and RWD drivetrain layout.

For builders, installers, and performance shops, the Performance Automatic PASS68103 provides a more complete automatic transmission solution for Ford drivetrain projects where fitment, control, converter matching, and supporting hardware matter.

Vehicle Fitment and Common Applications

The Performance Automatic PASS68103 transmission system is designed for compatible 2015–2021 Ford RWD applications using the 5.0L/302 V8 engine platform. It is associated with the Ford modular V8 engine family and the 6R80 transmission configuration.

The listed application details include Ford, beginning year 2015, ending year 2021, V8 engine type, 5.0L/302 engine size, RWD drivetrain, and 6R80 transmission manufacturer code.

Fitment should always be verified before ordering. Buyers should confirm the vehicle year, engine family, drivetrain layout, transmission code, bellhousing compatibility, controller requirements, wiring needs, crossmember location, driveshaft setup, cooler requirements, and speedometer needs.

This transmission is listed with a Chevy bellhousing bolt pattern manufacturer while the application section lists Ford 5.0L/302 modular V8 use. Because of this, buyers and installers should verify the full build combination carefully before purchase to confirm that the transmission system matches the intended engine and vehicle setup.

The notes also state that the Ford 6R80 does not have mechanical speedometer provisions. This is important for classic swaps and custom builds where a mechanical speedometer may be expected.

Street Smart Transmission Package Value

The Performance Automatic Street Smart lineup is designed for builders who want a matched transmission package for street-driven performance vehicles. These systems are made for street rods, street machines, and high-performance crate-engine applications where a standard used transmission may not provide the right combination of strength, control, and supporting parts.

The PASS68103 is sold as a kit, not just a bare transmission. This gives buyers a more complete starting point for a drivetrain upgrade.

The package includes a torque converter, transmission controller, wiring harness, and dipstick. These parts are important because modern automatic transmission swaps often require electronic control, correct converter matching, and proper wiring integration.

The torque converter diameter is listed as 12.000 inches, and the transmission is lockup compatible. Lockup compatibility is valuable for street use because it can help improve drivability and efficiency when properly configured.

For performance builders, a matched package helps reduce the guesswork that can come with sourcing individual drivetrain components separately.

6-Speed Automatic Performance and Drivability

The Performance Automatic PASS68103 uses a 6-speed automatic transmission design. A 6-speed automatic can provide a wider operating range than older 3-speed or 4-speed automatic transmissions, helping balance launch, acceleration, cruising, and drivability.

The listed first gear ratio is 4.17, giving the transmission strong low-speed multiplication when matched with the right engine, rear gear, tire size, and vehicle weight. This can support better off-the-line response in compatible performance applications.

The forward shift pattern and automatic valve body style make this transmission suitable for drivers who want the convenience of automatic operation in a performance-focused build.

This kit does not include a trans-brake, making it more street-oriented rather than a dedicated drag-race package. It is intended for street rods and street machines where responsive automatic operation, matched components, and reliable street behavior are priorities.

Because the kit includes a transmission controller and wiring harness, it supports electronic transmission management when installed correctly.

Case, Pan, and Build Details

The Performance Automatic PASS68103 uses an OEM case style with an aluminum transmission case finished in black. Aluminum case construction helps keep the transmission lighter than many heavier materials while still supporting performance street use.

The transmission pan is listed as stock style, made from steel, and finished in a natural finish. A stock-style steel pan is practical for street installations and service access.

This transmission does not include a built-in transmission shield or flexplate shield. Buyers building vehicles for racing or certain regulated performance use should verify any shielding requirements separately.

The kit also does not include transmission fluid or a transmission cooler. Proper fluid selection and cooler planning are essential for automatic transmission durability, especially in performance applications or vehicles that see heat, traffic, towing, or spirited driving.

The transmission is listed as remanufactured, which means buyers should treat proper installation, flushing of compatible cooling lines, correct fluid fill, controller setup, and break-in procedures as important parts of the final installation.

Included Components and Missing Items

The PASS68103 Street Smart transmission system includes several important components that help make it a more complete drivetrain package.

Included components are the remanufactured 6-speed automatic transmission, 12-inch torque converter, transmission controller, wiring harness, and dipstick. Performance Automatic Street Smart packages are also described as including an upgraded transmission, torque converter, filler tube, and transmission mount, except Ford applications where noted.

Not included components are just as important to review. The kit does not include a flexplate, transmission cooler, transmission fluid, trans-brake, bellhousing shield, flexplate shield, or mechanical speedometer provisions.

Because no mechanical speedometer provisions are included on the Ford 6R80, buyers planning a classic vehicle swap should confirm how speed signal will be handled before ordering.

For best results, the installation should be planned by a qualified builder or transmission professional familiar with modern electronically controlled automatic transmission systems.

Key Benefits for Ford Performance Builds

The main benefit of the Performance Automatic Street Smart Transmission Systems PASS68103 is that it provides a matched transmission package instead of a bare transmission alone.

The included torque converter, transmission controller, and wiring harness are valuable because they support modern automatic transmission integration. This is especially useful for street rods, street machines, and crate-engine projects where drivetrain control must be planned carefully.

The 6-speed automatic layout gives the vehicle better gear spread than older automatic transmissions. The 4.17 first gear ratio supports strong initial acceleration, while the extra forward gears can improve overall drivability when matched with the correct vehicle setup.

The lockup compatible design adds further value for street use. When configured properly, lockup operation can support smoother cruising and more efficient power transfer.

For repair shops and builders, this package helps simplify parts sourcing by combining several major transmission components in one system.

Who This Transmission System Is Best For

This transmission system is best for builders working on compatible 2015–2021 Ford RWD 5.0L/302 V8 applications that require a Ford 6R80 automatic transmission package.

It is also suitable for street rod builders, street machine owners, performance shops, restomod builders, crate-engine installers, and drivetrain specialists who need a matched 6-speed automatic transmission system with electronic control components.

This product is a strong choice when the build requires an automatic transmission with a torque converter included, controller included, wiring harness included, and lockup compatibility.

It is not ideal for buyers who need a mechanical speedometer connection, a complete cooling package, transmission fluid included, a flexplate included, or a trans-brake-equipped racing transmission.

This kit should be matched carefully to the intended vehicle, engine, drivetrain, speedometer setup, cooler system, and installation plan before purchase.

Technical Details and Included Components

The Performance Automatic Street Smart Transmission Systems PASS68103 is a remanufactured 6-speed automatic transmission kit sold individually as a complete package. It is part of the Performance Automatic Street Smart Transmission Systems product line and is associated with Summit Racing part number PMA-PASS68103.

This transmission uses a forward shift pattern, automatic valve body, OEM case style, aluminum case, and stock steel transmission pan. The case finish is black, and the pan finish is natural.

The kit includes a 12.000-inch torque converter, transmission controller, wiring harness, and dipstick. It does not include a flexplate, transmission cooler, transmission fluid, trans-brake, built-in transmission shield, or built-in flexplate shield.

Fitment Support and Ordering Notes

Before ordering the Performance Automatic PASS68103, buyers should confirm that the transmission system matches the intended vehicle and drivetrain setup. Important details include year range, engine family, drivetrain layout, transmission code, bellhousing configuration, torque converter requirements, controller setup, wiring compatibility, cooler planning, driveshaft fitment, and speedometer operation.

The application listing identifies this system for 2015–2021 Ford RWD 5.0L/302 V8 use with the Ford 6R80 transmission code. However, the overview also lists a Chevy bellhousing bolt pattern manufacturer, so professional fitment verification is strongly recommended before purchase.

This kit does not include a transmission cooler or transmission fluid. A properly sized cooler and correct fluid are important for transmission life, especially in performance street vehicles.

Buyers should also note that the Ford 6R80 does not have mechanical speedometer provisions. If the vehicle requires a mechanical speedometer, an electronic speed solution or compatible conversion plan may be needed.

Customers can compare this kit with other automatic transmissions, Performance Automatic transmission systems, Ford 6R80 transmission kits, compatible torque converters, transmission coolers, wiring components, mounts, and drivetrain accessories when planning a complete build.

Frequently Asked Questions

What is the Performance Automatic PASS68103 transmission system?

The Performance Automatic PASS68103 is a Street Smart 6-speed automatic transmission system sold as a kit. It includes a remanufactured transmission, torque converter, transmission controller, wiring harness, and dipstick for compatible performance applications.

What vehicles is this transmission system designed for?

The listed application is 2015–2021 Ford RWD vehicles with a 5.0L/302 V8 from the Ford modular V8 engine family using the 6R80 transmission platform. Buyers should verify fitment before ordering.

Does the PASS68103 include a torque converter?

Yes. This transmission kit includes a 12.000-inch torque converter. It is also lockup compatible, making it suitable for street-focused applications where proper converter operation and cruising behavior matter.

Does this transmission include a controller and wiring harness?

Yes. The Performance Automatic PASS68103 includes a transmission controller and wiring harness. These are important for electronic transmission operation and should be installed according to the build requirements.

Does the Ford 6R80 have a mechanical speedometer output?

No. The product notes state that the Ford 6R80 does not have mechanical speedometer provisions. Buyers planning a classic swap should confirm an electronic speedometer or conversion solution before installation.

Is this transmission new or remanufactured?

This transmission system is listed as remanufactured. It is sold as a kit and should be installed with the correct fluid, cooler setup, wiring, controller configuration, and drivetrain components.

What is not included with this transmission kit?

This kit does not include a flexplate, transmission cooler, transmission fluid, trans-brake, built-in transmission shield, or built-in flexplate shield. Buyers should plan these items separately where required.